Victron - Paneler og overvåkning


Victron - Paneler og overvåkning

Sorter etter:
Tilbud

AC-in connector

AC-in connector

Minste bestillingsenhet: 1
Tilbud

AC-out connector

AC-out connector

Minste bestillingsenhet: 1

Anti-islanding relay SPI1021

Product description

Minste bestillingsenhet: 1

Anti-islanding relay UFR1001E

Product description
The grid protection device UFR1001E monitors voltage and frequency in three-phase current networks. In complies with the conditions for centralized NA-protection according to VDE-AR-N 4105 in in-plant power generators >30kVA, for feeding into the low voltage grid and the BDEW Directive for feeding into the medium voltage grid. When using with generators, the evaluation of feedback contacts for the period of a shut-down and during the synchronization can be suppressed.

Minste bestillingsenhet: 1

Battery Alarm GX Retail

Battery Alarm GX
The Battery Alarm is a small and low cost alarm panel which monitors your battery bank. It features both audible and visual alarms, as well as a potential free contact with normally open and normally closed contacts. Alarm thresholds and hysteresis are programmable by DIP switches. See manual for more information.

Minste bestillingsenhet: 1
Tilbud

Battery Alert 24V

Intelligent warning system
Finally a product which prevents the batteries of your scooter from being discharged for longer periods of time.
The “Battery Alert” warns its user when the batteries aren’t being recharged after 12 hours of inactivity.

Minste bestillingsenhet: 1

Battery Management System BMS 12/200

VE.Bus BMS
The VE.Bus BMS protects each individual cell of a Victron lithium-iron-phosphate (LiFePO4 or LFP) battery.
Each individual cell of a LiFePO4 battery must be protected against over voltage, under voltage and over temperature. Victron LiFePO4 batteries have integrated Balancing, Temperature and Voltage control (acronym: BTV) and connect to the VE.Bus BMS with two M8 circular connector cord sets.The BTVs of several batteries can be daisy chained. Please see our LiFePO4 battery documentation for details.
The BMS will:
Shut down or disconnect loads in case of imminent cell under voltage Reduce charge current in case of imminent cell overvoltage or over temperature (VE.Bus products only, see below) Shut down or disconnect battery chargers in case of imminent cell overvoltage or over temperature

Minste bestillingsenhet: 1

Battery Monitor BMV-700

The BMV is a high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge and voltage of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.

Minste bestillingsenhet: 1

Battery Monitor BMV-700H

The BMV is a high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge and voltage of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.

Minste bestillingsenhet: 1

Battery Monitor BMV-702

The BMV is a high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge and voltage of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.

Minste bestillingsenhet: 1

Battery Monitor BMV-702 (Black)

The BMV is a high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge and voltage of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.

Minste bestillingsenhet: 1

Battery Monitor BMV-712 Smart

The BMV is a high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge and voltage of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.

Minste bestillingsenhet: 1