Til toppen

VICTRON AGM BATTERI 12V 90AH (C10) nedsenket bolt

Victron AGM deep cycle battery 90Ah (C10) 12V

Varenummer: BAT412800085

inkl. mva.

Sealed (VRLA) AGM Batteries
AGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass fibre mat between the plates by capillary action.
As explained in the book ‘Energy Unlimited’, AGM batteries are more suitable for short time delivery of very high currents (engine starting) than gel batteries.

Our AGM deep cycle batteries have excellent high current performance and are therefore recommended for high current
applications such as engine starting. Due to their construction, Gel batteries have a lower effective capacity at high discharge
currents. On the other hand, Gel batteries have a longer service life, both under float and cycling conditions.

Rated capacity: 20 hr. discharge at at 25°C
Float design life: 10-12 years at 20°C

Cycle design life:
- 400 cycles at 80% discharge
- 600 cycles at 50% discharge
- 1500 cycles at 30% discharge
Høyde totalt 183.0 mm
Lengde 350.0 mm
Bredde 167.0 mm
Vekt 27.0 kg
Kapasitet 90 Ah
Varenr.: BAM010700100

Battery Monitor BMV-700H

The BMV is a high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge and voltage of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.
BAM010700100
Varenr.: BAM010702000

Battery Monitor BMV-702

The BMV is a high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge and voltage of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.
BAM010702000
Varenr.: BAM010702200

Battery Monitor BMV-702 (Black)

The BMV is a high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge and voltage of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.
BAM010702200
Varenr.: BAM030712000

Battery Monitor BMV-712 Smart

The BMV is a high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge and voltage of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.
BAM030712000
Varenr.: 1085

Pol Adapter (Par) 8 mm +/-

Poladapter for AGM batteri - 8 mm bolt.
1085
Varenr.: ASS000100000

Temperature sensor for BMV-702

Denne temperatursensoren tillater den andre kanalen på BMV 702 å brukes til batteritemperaturmåling i stedet for å overvåke spenningen til et ekstrabatteri. BMV kan lagre temperaturavlesningene i er historisk datalager. Sensoren er ikke den samme som sensorer som brukes i andre Victron-produkter, slik at dette kun kan brukes sammen med BMV702. Sensoren leveres med en kort ledning som plugger inn i kretskortet på shunt.
ASS000100000
Varenr.: NH12-350W

AGM BATTERY NH12V 350W HIGH RATE 90AH (C10) T12

ANDA NH HIGH POWER SERIES AGM
THE HIGH-DENSITY LEAD PLATE BATTERY FOR DEEPER DISCHARGE.
NH12-350W
Varenr.: NM12-80

AGM BATTERY NM12V 80AH (C10) T12

Anda NM standard AGM industribatteri
Kvalitetsbatteri med 10 års designet levetid
NM12-80