BATTERI ISOLATOR CYRIX 12/24V 400A
The Cyrix-ct intelligent battery combiner is a microprocessor controlled heavy duty relay that automatically connects batteries in parallel when one of them has reached a preset voltage (indicating that the battery is being charged), and disconnects when the voltage decreases below float level (indicating that one or more batteries are being discharged).
Bidirectional voltage sensing and dual power supply: Sensing the voltage of both connected batteries, the Cyrix will engage if for example the accessory battery is being charged by a battery charger. The Cyrix-ct 12/24 also has a dual power supply and will close if the voltage on one battery is too low to operate the Cyrix but will not close if the voltage on one of the two battery connections is lower than 2V (12V battery) or 4V (24V battery).
Long bolts to allow connection of more than one power cable: 13 mm (M6)
Protection against overheatingThe Cyrix will disengage in case of excessive contact temperature, and re-engage again after it has cooled down.
No voltage loss: Cyrix battery combiners are an excellent replacement for diode isolators. The main feature is that there is virtually no voltage loss so that the output voltage of alternators or battery chargers does not need to be increased.
Prioritising the starter battery: In multiple battery connections, when a Cyrix senses that the starter battery has reached the connect voltage it will engage, to allow for parallel charging of the other batteries.
Parallel connection in case of emergency (Start Assist) The Cyrix can also be engaged with a push button (Cyrix remains engaged during 30 seconds) or a switch to connect batteries in parallel manually. This is especially useful in case of emergency when the starter battery is discharged or damaged.
|Høyde totalt||78.0 mm|